How to Setup Xbox 360 to Home Theater System and HDMI Cable

NOTE : I forgot to mention it depends on the sound system you have not every system will have the three inputs I mention in the directions or video Step 1: Take the plastic off the audio/video wire …..plug it into your xbox….. Then take the white and red cord and plug it into your Home Theater System…..Aux, Tape, TV, or VCX………..

Step 2: Change the video settings of your Home System to which ever you plugged the (Xbox audio/video) white and red cords in ……(so if you plugged it into AUX then you would change the video settings to AUX)

Step 3: Once you’ve done that……go back to the Xbox and insert the HDMI cable below the audio/video cable…..both of them should fit by now at the same time….

Step 4: Make sure the HDMI cable and the audio video cable are both plugged in the Xbox……Now take the HDMI cable and and insert it into the TV………Plug it into HDMI 1,2, or 3 port…..which ever one is available……If u insert it in HDMI 3 …..Then you go to your TV settings and set it on HDMI 3…..it should work

source

10 comments